LabJack U3-HV
USB DAQ device with 4 12-bit high-voltage analog inputs, up to 12 low-voltage analog inputs, up to 20 digital I/O, 2 10-bit analog outputs, up to 2 counters, and up to 2 timers.

Details/Order

$114.00

In Stock

Yes

LabJack U3-LV
USB DAQ device with up to 16 12-bit analog inputs, up to 20 digital I/O, 2 10-bit analog outputs, up to 2 counters, and up to 2 timers.

Details/Order

$108.00

In Stock

Yes

LabJack UE9
USB/Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2 analog outputs (12-bit), 23 digital I/O, 2 counters, and 6 timers. 8 of the digital I/O can be configured on the fly as up to 6 timers and 2 counters.

Details/Order

$439.00

In Stock

Yes

LabJack UE9-Pro
All the features of the normal UE9 with the addition of an auxiliary low-speed hi-resolution (24-bit) sigma-delta ADC.

Details/Order

$539.00

In Stock

Yes

LabJack U12
USB DAQ device with 8 12-bit analog inputs, 2 analog outputs, 20 digital I/O, and a 32-bit counter.

Details/Order

$129.00

In Stock

Yes

LabJack U3-HV-OEM Board-Only
OEM version of the U3-HV.

Details/Order

$93.00

In Stock

Yes

LabJack U3-LV-OEM Board-Only
OEM version of the U3-LV.

Details/Order

$89.00

In Stock

Yes

CB15 Terminal Board
Provides convenient screw terminals for the DB15 connector on the LabJack U3 or UE9.

Details/Order

UE9 / U3

$29.00

In Stock

Yes

CB25 Terminal Board
Provides screw terminal connections for the LabJack U12's 16 extra digital I/O.

Details/Order

U12

$39.00

In Stock

Yes

CB37 Terminal Board (Rev 1.2)
Provides convenient screw terminals for the DB37 connector on the LabJack UE9.

Details/Order

UE9

$19.00

In Stock

No

CB37 Terminal Board (Rev 2.1)
Provides convenient screw terminals for the DB37 connector on the LabJack UE9.

Details/Order

UE9

$39.00

In Stock

Yes

EB37 Experiment Board
The EB37 experiment board connects to the LabJack UE9’s DB37 connector and provides screw terminals and a solderless breadboard.

Details/Order

UE9

$99.00

In Stock

Yes

EI1022 Temperature Probe
Easy to use and inexpensive temperature probe features a high-level linear output of 10 mV per degree K and a typical accuracy of ±1 degrees C (±1.8 degrees F) at room temperature.

Details/Order

U12 / UE9 / U3

$29.00

In Stock

No

EI1034 Temperature Probe
Easy to use, very accurate, and waterproof temperature probe features a high-level linear output of 10 mV per degree F and a typical accuracy of ±0.4 degrees F (±0.22 degrees C) at room temperature.

Details/Order

U12 / UE9 / U3

$49.00

In Stock

No

EI1040 Dual Instrumentation Amplifier
Stand-alone dual instrumentation amplifier with ±10 volt maximum input range, and gains of 1, 10, 100, or 1000.

Details/Order

U12 / UE9 / U3

$99.00

In Stock

Yes

EI1050 Digital Temperature/Humidity Probe
Uses two digital lines on any LabJack to retrieve temperature and relative humidity measurements.

Details/Order

U12 / UE9 / U3

$64.00

Backordered - ETA Aug 29

No

LabJack U12-NTH OEM Board-Only
OEM board-only version of the LabJack U12, with no through-hole components installed.

Details/Order

$109.00

In Stock

Yes

LabJack U12-PH OEM Board-Only
OEM board-only version of the LabJack U12, with pin-headers installed (component side) instead of screw-terminals.

Details/Order

$109.00

In Stock

Yes

LJTick-CurrentShunt
Signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal (U3/UE9).

Details/Order

UE9 / U3

$39.00

In Stock

Yes

LJTick-DAC
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per U3/UE9 to add 20 analog outputs.

Details/Order

UE9 / U3

$79.00

In Stock

Yes

LJTick-Divider
Signal-conditioning module designed to take 2 single-ended higher voltage analog signals, and divide them down to 0-2.5 volt signals (U3/UE9).

Details/Order

UE9 / U3

$25.00

In Stock

Yes

LJTick-InAmp
Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples (U3/UE9).

Details/Order

UE9 / U3

$49.00

In Stock

Yes

LJTick-Proto
The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks for the LabJack U3 or UE9.

Details/Order

UE9 / U3

$10.00

In Stock

No

LJTick-RelayDriver
The LJTick-RelayDriver (LJTRD) allows 2 digital I/O lines on a U3 or UE9 to each control a relay or other moderate load up to 50V/200mA.

Details/Order

UE9 / U3

$12.00

In Stock

Yes

RB12 Relay Board
The RB12 provides a convenient interface for the U3/UE9 to industry standard digital I/O modules. Modules are available (not included) with voltage ratings up to 200 VDC or 280 VAC, and current ratings up to 3.5 amps.

Details/Order

UE9 / U3

$119.00

In Stock

Yes

RB16 Relay Board
The RB16 provides a convenient interface for the U12 to industry standard mini digital I/O modules. Modules are available (not included) with voltage ratings up to 60 VDC or 240 VAC, and current ratings up to 3 amps.

Details/Order

U12

$89.00

In Stock

Yes